24V DC Backward Curved Centrifugal Fan Ventilation Fan Support
Basket 220 Industrial Blower
- Please do not touch the impeller with pressure and never handle the
fan by the leadwires. The bearings and lead wire may be damaged.
- During the installation of the fan, please pay substantial
attention to possible noise caused by resonance vibration.
- PSCMF does not guarantee the product against the safety problems or
failures caused by powder dust, drops of water or any object
impeding the blade
- If there is any data or related documentation different from this
data sheet, this data sheet is the principal reference.
- For the purpose of MIS, please indicate SPEC No. on every order.
- In case the fan has no polarity protection function, wires with the
same color(electrode) must be connected together during the
assembly. (i.e: red+red, black+black) or the fan will be damaged
- Please do not use the fan in the environment of corrosive gas,
liquid or any detrimental gas.
- Please do not store the fan in an environment of high/low
temperature , high humidity or any detrimental gas. Please store
the fan within 6 months , every 6 months there should be linkage of
electrical current to the fan, even though the fan is stored in
- While the fan is in operation, please do not lock the fan
intentionally for a long period of time, because the continuous
stoppage will over-heat the IC and thus burn-out of the fan.
- PSCMF will not guarantee the products if the application of our
products has exceeded the limitation which is specified on this
PSC has ownership factory located in Shipai, Dongguan China. This
factory is dedicated to manufacturing EC and DC fan designed by
PSC’s China engineering team.
The PSC China Sales and Management team has excellent English
speaking so communication is never an issue.
The company’s core engineering competence in China is focused on
the development of comprehensive DC and ECAC Backward Curved
Impeller product line and the continuous engineering of more
advanced devices in this product category
Over the years PSC has been a major supplier to HP Compaq, IBM,
ATI, Cisco Systems, Rockwell Automation, NCR, Bally Gaming
Technologies and is currently working with APC, SGI, AllenVanguard,
and many companies in Europe and mainland China itself.
The PSC Thermal team is especially capable in the area of
Engineering Design and Support. Our engineering has full Thermal
simulation and test capability.
It is the hope of PSC that this website becomes your “Thermal
Bible”; it is all you need to solve your system’s Thermal
PSC has been in the Thermal Solutions business since 1993.PSC
defines Thermal Solutions as all the components necessary to
accomplish the cooling of an Integrated Circuit to a PCB to a
Chassis to an entire Rack.
The company’s headquarters have been in Oxnard, California for more
than 20 years. PSC in the USA functions as a Sales and Marketing
entity with Warehousing and Engineering design and support
|2||Bearing System||2 Ball Bearing|
|3||Rated Voltage||24 VDC|
|4||Operating Voltage||16~28 VDC|
|5||Starting Voltage||16 VDC|
|6||Input Current||7.37 A|
|7||Input Power||176.88 W|
|8||Rated Speed||3560±5% RPM|
|9||Rotation||Clockwise, seen on rotor|
|10||Air Flow||762.92 CFM (1296.15 m³/h)|
|11||Static Air Pressure||2.7 inH2O (68.47 mm H2O)|
|13||Speed Control||PWM or 0~10VDC|
|14||Tachometer Output||TTL-5V, 4 Pulses/Rev|
|17||Noise Level||76 dB(A)|
|18||Lead Wire||UL2464, 4*AWG20#, L=500 mm|
|21||Life Expectance||50,000 hours continuous operating at 40℃|
|23||Operation mode||Continuous operation (S1)|
|24||Type of protection||IP 42|
|25||Type of wheel||One piece wheel (11 blades)|
|26||Dielectric Strength||500VAC/60Hz, 1 min, Leakage current <=3.5mA|
|28||Packing||Corrugated carton, 4 pcs/carton|